Changing a Keg

Process for changing a keg:

  1. Create room to access empty keg
  2. Release the gas line by turning anti-clockwise and pulling out
  3. Release the coupler by turning anti-clockwise off the keg
  4. Remove empty keg and move full keg into place (make sure it’s the right keg!)
  5. Place the coupler into the groove on new keg and tighten by turning clockwise
  6. Place the gas line into the tap again
  7. Press down the tap into the new keg
  8. Flick the switch under the hook and pump the beer through at the same time, until the ball reaches the top. Once the ball reaches the top, face the hook under the fob away from you
  9. Place the empty keg in its respective spot for empty kegs